If your deck needs repair, there are several things you can do yourself. First, you should inspect the entire deck, including any parts that come in contact with the ground. Use a screwdriver to check for structural damage, including rot. Rotted wood is a red flag that may mean a full-scale renovation. Other signs of the need for Deck Repair Charleston SC include missing fasteners, bent or rusted flashing, and black stains.
Moisture and ultraviolet rays from the sun discolor wood, which forces it to warp and rot. These problems are exacerbated by climate change, which affects wood, both cold and warm. It expands in warmer climates and contracts in colder climates. Moisture can also corrode decking, so protecting your deck by applying wood preservatives is essential. Aside from these steps, regular monitoring of boards can help prevent dry rot.
Damaged posts, beams, and joists can be replaced with pressure-treated lumber. Otherwise, you can chisel out the affected joists and replace them with new ones. In either case, use a scrap of wood as a fulcrum and pull out the nails one at a time. Don’t forget to paint the entire deck with a waterproof sealant. If the damage isn’t extensive, a deck repair contractor can help you plan for future maintenance.
Deck repairs do not have to be a stressful and expensive experience. A professional team of deck repair experts will assess the damage and suggest a course of action. Decks are notorious for losing their appeal and can last up to twenty years. However, the condition of the framing will determine whether or not it’s salvageable. If the framing is untreated, it’s usually lost cause.
You can also apply a bleach and water solution to remove mildew. Use 1 cup of bleach in one gallon of water and rinse the affected area with water. If the mildew isn’t completely gone, you can apply commercial brighteners. Just make sure to follow the instructions on the package. Another factor to consider is shade. The sun’s UV rays can dry out the wood, so avoiding shaded areas can help.
Deck repair is an expensive endeavor. The costs can range from $100 to $500, but this amount is dependent on the type of damage, the age of the deck, and the location where the damage occurs. It’s important to receive estimates from several contractors before you hire anyone. Different contractors charge different prices for labor. You should request estimates from at least three different contractors before deciding which one will work on your deck. It’s worth it to compare costs and see which one fits within your budget.
Another common issue that may require repairs is sagging railing. Loose railing can be a hazard and may even be unsafe, so it’s important to inspect your railings periodically. If you notice sagging, you may want to contact a contractor. A weakened railing can be dangerous, and you should consider replacing it entirely if it needs to be replaced for safety reasons. If the railing is rotten, you should contact a deck repair company to get it fixed as soon as possible.
If you’re on a tight budget, deck repair is not a problem. By following some budget-friendly tips, you can easily make your deck repair project more affordable and beautiful. One great way to save money is to check out reuse and recycle centers for inexpensive supplies. You can also try refinishing lightly used wood to make it look new again. In some cases, deck repair contractors may even offer free materials for you to use. The cost of deck repair will depend on the size of the area that you need repaired.
To apply a coat of deck sealer:
- Use a roller to apply the coating in three or four board sections.
- Remember to use a cardboard as a spray shield to avoid staining bricks. The deck stain should be applied while the first coat is still wet, so subsequent coats won’t dry out.
- Apply two thin coats instead of one thick one.
- Before staining your deck, check the structure for cracks, splinters, and protruding nails. Once the stain is applied, it must be sanded down with 80-grit sandpaper.
The ledger board is a critical piece of framing for your deck. A damaged ledger is the primary cause of 90 percent of deck collapses. If you can’t find the proper screws to attach it to the wood deck, replace them with coated ones. Likewise, check your deck railings and replace loose ones if necessary. Lastly, it’s a good idea to wash the wood deck with a mild detergent and water mixture. If you have sap stains, mineral spirits will remove them. Make sure to rinse thoroughly afterwards.